SY-805G [Gas Burner Heating Type]
Continuous Bright Carburizing (Hardening) Quenching Furnace
Application
- Carburizing or tempering treating to screw, nut, bicycle parts, car parts, forged parts, hand tools, hardware parts, etc.
Features
- Adopts U.S.A. gas combustion system and install original brand heat exchanger will rise 20% burning efficiency.
- Radiate tube adopts imported heat-resistant stell and centrifugal casting tube, small per-centage of deformation and last longer.
- Temperature is controlled by pressure type which can make precise of temperature to needed.
- Heated by gas and electricity to reduce manufacturing cost. It is the best choice for areas having difficulty in applying for lots of electricity.
- Temperature-rising takes less time than that uses electricity, suitable for mass production and it is not affected by output power
Specification
| Model | Treating Capacity to Middle /High Carbon Steel (kg) |
Treating Capacity to Low Carbon Steel (kg) |
Conveyer Width (m/m) |
Inside Height (m/m) |
Length of Heating Section (m/m) |
Combustion Ability (m/m)kcal/hr |
Power (Max) (kw) |
|---|---|---|---|---|---|---|---|
| SY-805G-4 | 506-572 | 413-463 | 800 | 100 | 6000 | 180000 | 45 |
| SY-805G-5 | 720-780 | 546-598 | 800 | 100 | 8000 | 300000 | 90 |
| SY-805G-6 | 1000-1100 | 833-917 | 800 | 100 | 10000 | 400000 | 90 |
| SY-805G-6S | 1200-1320 | 999-1100 | 800 | 100 | 12000 | 450000 | 95 |
| SY-805G-7 | 1250-1375 | 1040-1146 | 1000 | 100 | 10000 | 467000 | 95 |
| SY-805G-7S | 1500-1650 | 1249-1375 | 1000 | 100 | 12000 | 525000 | 135 |
| SY-805G-8 | 1800-1980 | 1499-1650 | 1200 | 100 | 12000 | 690000 | 135 |
